Форматнулся...
Форматнулся...
Когда тсавил акиту (хром) онр просил переформатить хар что я и сделал теперь при попытке ыернуть каку кака ругается на то что не может найти хд 3... что делать? формиатировал хард загрузчиком акиты (хрома) не помагает все равно ругается ... что же лесть в диагностическое меню и там делать хард ерз 00 ?
У тебя эта проблема?
http://www.hpc.ru/board/viewtopic.php?t=96587
http://www.hpc.ru/board/viewtopic.php?t=96587
Zaurus 3100; CF Socket BT; CF WiFi D-Link; CF LAN;
нет другая... сначало хда1,2,3 не подниммались теперь я их поднял как написанно в текстовике
Contents of the system-partitions for the SL-C3200
TRIsoft / Marc Stephan / April 11th, 2006
Use the information in this document at your own risk.
TRIsoft is not liable for any damages that may result from
these informations.
SL-C3200 HDD-Partition table:
/dev/hda1 Start 1 End 20 Blocks 10048+ id 83 System Linux
/dev/hda2 Start 21 End 40 Blocks 10080 id 83 System Linux
/dev/hda3 Start 41 End 11905 Blocks 5979960 id c System Win95 FAT32 (LBA)
Note:
While using the fdisk on the Zaurus, double check that you set the
correct parameters for the drive. They have to be:
16 heads / 63 sectors/track / 11905 cylinders
Format the partitions with:
mke2fs -j /dev/hda1
mke2fs -j /dev/hda2
mkfs.vfat -F 32 /dev/hda3
/hda1 and /hda2 are 9.5 MB partitions. Each one contains a ".sys" and
a "lost+found" directory. The contents of the .sys-directories are
in this file.
Files in /hdd1/.sys :
hdimage2.tgz (2149 Bytes, contains japanese web-bookmarks - hurray !)
hdlist1.dat (85 Bytes, no clue what it's good for)
Files in /hdd2/.sys :
contlist.dat (74327 Bytes)
hdlist2.dat (1264 Bytes)
hdlist3.dat (1519 Bytes)
The Zaurus will display an error like "HDD not initialized" if the
directories and files are missing. Just restoring the partition table
won't make an SL-C3200 happy.
я разбил их как надо теперь как ругается мол дорогой друг я пытаюсь заглянуть за вот эту хрень (олграничение блока dev/hda1 Start 1 End 20 Blocks 10048+) и не могу и так с кахжым диском а потом загружается как новая... (((
Contents of the system-partitions for the SL-C3200
TRIsoft / Marc Stephan / April 11th, 2006
Use the information in this document at your own risk.
TRIsoft is not liable for any damages that may result from
these informations.
SL-C3200 HDD-Partition table:
/dev/hda1 Start 1 End 20 Blocks 10048+ id 83 System Linux
/dev/hda2 Start 21 End 40 Blocks 10080 id 83 System Linux
/dev/hda3 Start 41 End 11905 Blocks 5979960 id c System Win95 FAT32 (LBA)
Note:
While using the fdisk on the Zaurus, double check that you set the
correct parameters for the drive. They have to be:
16 heads / 63 sectors/track / 11905 cylinders
Format the partitions with:
mke2fs -j /dev/hda1
mke2fs -j /dev/hda2
mkfs.vfat -F 32 /dev/hda3
/hda1 and /hda2 are 9.5 MB partitions. Each one contains a ".sys" and
a "lost+found" directory. The contents of the .sys-directories are
in this file.
Files in /hdd1/.sys :
hdimage2.tgz (2149 Bytes, contains japanese web-bookmarks - hurray !)
hdlist1.dat (85 Bytes, no clue what it's good for)
Files in /hdd2/.sys :
contlist.dat (74327 Bytes)
hdlist2.dat (1264 Bytes)
hdlist3.dat (1519 Bytes)
The Zaurus will display an error like "HDD not initialized" if the
directories and files are missing. Just restoring the partition table
won't make an SL-C3200 happy.
я разбил их как надо теперь как ругается мол дорогой друг я пытаюсь заглянуть за вот эту хрень (олграничение блока dev/hda1 Start 1 End 20 Blocks 10048+) и не могу и так с кахжым диском а потом загружается как новая... (((
Немного пошаманив заставил грузится с сд карты и получил такуюже проблему на которую ты дал сцылки... как раскладывать? через зугрузучную кончоль не получается...debian писал(а):У тебя эта проблема?
http://www.hpc.ru/board/viewtopic.php?t=96587
Восстановите жесткий диск с помощью бекапа от TrisoftZeroCold писал(а):ак вернуть в рабочее состояние хард диск
http://www.trisoft.de/en_c3200howto.htm
Palm Tungsten T3 -> Acer n30 ->Zaurus SL-C3100 (PdaXrom Beta3) + Motorola A1200e